To Move a Referenceline

To move or rotate an existing referenceline to a target line, use the following procedure.

You must first draw a MicroStation or Civil line for the target line. The station or skew of the target line is used to update the referenceline based on the tool settings.

This is used to translate or rotate an existing referenceline. You can change other properties of a referenceline (e.g., length) by selecting its properties from the pop-up context menu or the Project Explorer.

Either:
On the Home ribbon tab, select the Move tool in the Reference Line group.

Or

Key in TDGEOMETRY REFERENCE MOVE

Select the move option in the Move ReferenceLine Tool Settings dialog:

Move Option	Description
Station And Skew	Moves the referenceline to the same station as the target line and matches its skew
Station Only	Moves the referenceline to the same station as the target line, but leaves the skew untouched
Skew Only	Matches the skew of the target line but leaves the referenceline at the same place

Data point on an existing referenceline to move.
Select the existing target line.
The referenceline is moved or rotated to match the target line as selected.