Analysis And Reporting

Input Report

TBM UTR Reports

Opens the preview window with parameters used to generate a report with inputs to place TBM UTR tunnel, Ring Rotation Matrix table and a table that shows the actual placed rings with their corresponding position and deviations from the theoretical alignment.

TBM UTR As Built Reports

Opens the preview window with parameters used to generate a report with inputs to place TBM UTR As Built tunnel and a table that shows the actual placed rings with their corresponding position and deviations from the theoretical alignment.

Construction Scheduler Report

Opens the preview window with parameters used to generate a report listing inputs that have been given in Construction Scheduler GUI.

Dynamic View By Station

Settings

Used to specify dynamic view settings for UTR Unfolded View and UTR Ring Positions drawings.

UTR Unfolded View

Used to create unfolded view drawings for TBM UTR tunnels.

UTR Ring Positions

Used to create drawings that show ring positions for TBM UTR tunnels.

Place Named Boundary

Used to open the tool to create place named boundaries.

Named Boundaries

The named boundaries list box displays the following columns:

• Name- Name of the named boundary or named boundary group.
• Description- Description of the named boundary or named boundary group.
• File Name- Sets the name of the named boundary or named boundary group you want to create.
• Show- Check box to turn on or off the display of the named boundary or named boundary group.

Adjust Profile Named Boundary

Used to allow dynamic adjustment of the profile named boundaries after initial layout where the view needs to be adjusted to better accommodate information in the profile view.

Place Label

Civil Labeler

Element Annotation

• Annotate Element- Adds an annotation to a selected element.
• Remove Element Annotations- Removes an annotation of a selected element.

Model Annotation

• Annotate Model- Adds an annotation to a selected drawing model.
• Remove Model Annotations- Removes an annotation of a selected model.

Allows you to set the scale factor for text and dimensioning.

Allows you to turn on a lock to the scale factors on the annotation scale.

• The radius of a circle or circular arc.
• The radius of a cone or cylinder.
• The primary and secondary axes of an ellipse or elliptical arc.
• The radius of a circular segment or axes of an elliptical segment of a complex chain or complex shape.

• Place Arc - Place a circular arc.
• Place Half Ellipse - Place an elliptical arc with a sweep angle of 180?.
• Place Quarter Ellipse - Place an elliptical arc with a sweep angle of 90?.
• Modify Arc Radius - Modify a circular arc's radius, sweep angle, and center.
• Modify Arc Angle - Extend or shorten an arc's length (sweep angle).
• Modify Arc Axis - Lengthen or shorten an axis of an arc.

• Place Circle - Place a circle.
• Place Ellipse - Place an ellipse, precisely positioning the center and one end of the primary axis.

• Place Block - Place a rectangular shape.
• Place Shape - Place a polygonal shape.
• Place Othogonal Shape - Place a shape with each segment either perpendicular or parallel to all other segments in the shape.
• Place Regular Polygon - Place a regular polygon (one with all sides and angles the same).

• B-spline by Points - Place a B-spline curve.
• B-spline by Tangents - Create a B-spline curve that passes through a set of points while maintaining user-defined tangent directions at those points.
• Composite Curve - Place a composite curve, which can have line strings , arcs , or B?zier curves as components.
• Interpolation by Arcs - Place or construct a complex chain of arcs that passes through a given set of points.
• Conic Curve - Place a parabola, hyperbola, or partial ellipse.
• Spiral Curve - Place a clothoid or Archimedes or logarithmic spiral.
• Curve by Formula - Place a helix in a 3D design.

• Place Active Point - Place the Active Point.
• Point(s) Between - Construct equally spaced Active Points between two data points.
• Point on Element - Place the Active Point on an element at the point closest to the data point.
• Point at Intersection - Construct a point at an intersection.
• Point(s) Along Element - Construct a specified number of Active Points along an element between two data points.
• Point at Distance Along - Construct the Active Point on an element at a keyed in distance.

• Place Multi-Line - Place a planar-multi-line.
• Place Stream Line String.
• Place Point or Stream Curve
• Construct Angle Bisector
• Construct Minimum Distance Line
• Construct Line at Active Angle

• Place Text - Used to place a text element(s).
• Place Text Along - Used to place text relative to line segment (line element or segment of a line string, shape, or multi-line).
• Place Note - Used to place lines of text with a leader line and arrow, or a callout without a leader.

• Place Active Cell - Place the active cell.
• Replace Cells - Replace a cell(s) (or all instances of a shared cell) in the design with another of the same name from an attached library.
• Place Active Cell Matrix - Place a matrix (rows and columns) of the active cell.
• Define Cell Origin - Define the cell origin (the point about which the cell is placed) when creating the cell.
• Select and Place Cell - Identify a cell and place an additional instance(s).
• Identify Cell - Display the name and level of a cell that is in the DGN file.
• Place Active Line Terminator - Add a terminator to a line segment.
• Place Cell Index - Create and place a cell index.