OpenSite Designer

Single Offset Entire Element

Used to replicate an element at a specified distance from the original.

You can access this tool from the following:

  • Ribbon: Geometry > Horizontal > Offsets and Tapers split button

Use the Single Offset Entire Element tool to replicate an element at a specified distance from the original.

  1. Open the Horizontal Geometry section then click the Single Offset Entire Element icon.
    • The Single Offset Entire Element dialog opens.

    • Checking the box next to the Offset field locks in the associated value.

  2. When you move the cursor into the View, the command prompt requests that you "Locate Element", so data point, example, left-click on the element that you wish duplicate.

  3. Use one of the following methods to set the offset:

    • As you move the cursor, a value is displayed. Data point at the desired value.

    • Enter a value and strike the Enter key then data point.