Civil Analysis
Select in the Toolbox |
Description |
Allows you to generate a report information about a user-specified point location in a TM (elevation, slope, contour, and, slope direction). |
|
Allows you to generate a report information between 2 point locations on a TM (elevation difference, length and, slope). |
|
Calculated Area | Allows you to calculate the slope and planar area of the fence model. |
Allows you to calculate volume between 2 TMs or a TM and plane (elevation). Capable of processing in an area (fence) or multiple areas and computing the volumes over a range of elevations. Cut and fill factors are also options. |
|
Allows you to compute and displays the distance and direction between each pair of specified points. |
|
Allows you to trace along a surface either following a user-specified slope value or the steepest slope. Can trace upstream or downstream. |
|
Allows you to analyzes terrain model for ponds (low point) located via a data point location on a TM (volume and area max depth). |
|
Allows you to produce single report or multiple Civil Cells and or Corridors to create component quantity summary. |
|
Create Cut Fill Volumes | Allows you to compare civil
model based on the Volume Option in the assigned Feature Definition to
calculate the cut and fill volumes.
|
Allows to report volumes for specific station ranges and/or sheet clipping boundaries. | |
Allows you a cumulative total of cut and fill volumes along a horizontal alignment. The diagram is a tool for measuring how much material is being added to and removed from the design site. Select a cross section named boundary and within that set specify at least two cross-section surfaces. The results are then automatically generated based on the cross sections and surfaces selected, and the Mass-Haul diagram is plotted to the right of the cross section set. |
|
Allows you to calculate cut and fill using cross section named boundaries cut along a previously defined alignment. | |
Allows you to report of the top, bottom, and intermediate layers of a roadway design along the cross section named boundaries. | |
Allows you to produces a quick drive through visualization along an alignment. |
|
Compute Pond Volumes | Allows you to compute pond volumes between terrain models by using single or incremental methods. |
Elevation Difference Grid | Allows you to support a variety of grid generation and cut/fill element templates. |