|Place Label With Leader
Places a label with a leader line.
|Place Label Without a Leader Line
Places a label without a leader line.
||Selects the cell type from the drop-down list.
||Selects the cell name from the drop-down list.
When a cell name is picked the tool loads the dimension
style if there is one of the same name.
||Selects the dimensions style for the leader.
To create a new dimension style, click the
next to the Dimension Style
option menu to open the Dimension Styles dialog.
To restore any dimension-related tool settings to
the default dimension style settings, click the
Reset Style icon.
||Sets the rotation of the label relative to the
leader line: Horizontal, Vertical, or Inline.
||Sets whether the label should start from the
terminator or from the cell.
|| Sets the leader attachment side: Auto, Left or
Turns on annotation scale. When this lock is on, the
annotation scale is applied to the section callout. By default, the annotation
scale is taken from the model's Annotation Scale setting. You can change it
only in the model's properties in the Properties dialog. The exception is when
the model's Propagate Annotation Scale property is off. In that case, the
annotation scale can be controlled independently for each element via its
|Place Label With Regular Association
Sets regular association with the element. If you place a
label with this setting turned on and the
Place Label With Relative Association turned
off, the label is placed with regular association. In this case, if you move
the element, the label remains at the same place, only the leader line moves
along with the element.
|Place Label With Relative Association
(Enabled only when Place Label With Association is enabled)
Sets relative association with the element. If a label is placed with relative
association with an element, the label will stay at the same location relative
to the original snap point. That is, if you move the element the label will
also move with it.