Place Trench Key-In Arguments
LVASSETS PLACE TRENCH key-in accepts arguments. There are two directions for the key-ins:
- Place the Trenches relative to a geometry with an offset and elevation relative to the geometry.
- Place the Trenches with XY coordinates and absolute elevation (Z Coordinate).
The following key-in arguments are accepted by the Place Trench key-in:
Key-in: LVASSETS PLACE TRENCH <arg1>, <arg2>, <arg3>, ...
Arguments: (all are comma separated)
| Setting | Description |
|---|---|
| Feature Definition | (path and Feature Definition) |
| Name | (Feature Definition Name) |
| Start CoordinateX | |
| Start CoordinateY | |
| End CoordinateX | |
| End CoordinateY | |
| Reference Geometry Name (station/offset) | Alignment Feature Definition Name |
| Reference Geometry Name (elevation) | Alignment Feature Definition Name |
| Distance Along Centerline - Start | Station value |
| Distance Along Centerline - End | Station value |
| Offset Mode, | Values: OffsetFromCenterline or OffsetFromClosestRail |
| Offset Value - Start | |
| Offset Value - End | |
| Elevation Mode, | Values: Absolute, RelativeToActiveTerrain, RelativeToCenterline or RelativeToClosestRail |
| Elevation Value | |
| Origin ID |
Examples:
LVASSETS PLACE TRENCH Trench\Concrete\CONCRETE-350,Trench1,,,,,Track1,Track1,0+070.000,0+150.000,OffsetFromCenterline,2.65,2.65,RelativeToCenterline,-0.25,GUID001
LVASSETS PLACE TRENCH Trench\Ductbank\DUCTBANK 4X,Trench2,391067.51112,4504496.93827,391067.73133,4504503.72971,,,,,Absolute,2.65,,Absolute,-0.25,GUID002