Rail Topology

You can access this dialog from the following:

Ribbon: OpenRail Modeling > Rail Topology

Setting	Description
Create Topology	Railway - Creates a topological model from the selected geometry. Pathway Route - Defines a wire path view of the geometry which can then be used for placing masts, catenaries and other objects. Edge Segment - Adds segments to a selected edge to define the edge's range.
Topology Tools	Import Rail Equipment - Allows the user to import equipment such as signal locations from products like ContextCapture, including point or cell readings of signal locations. Synchronize Railway - Updates the topological model.
Schematic View	Open Railway Schematic View - Creates a schematic view based on a selected edge in the topology model. Reset - Allows the user to reset and update the schematic view if any changes have been made to the base topology model. Update Railway Schematic View - Refreshes the Schematic View after Low Voltage Assets are added. Add manipulator on edge - Allows you to add a manipulator to an edge in the Schematic View. Remove manipulators on edge - Allows you to remove manipulators from an edge in the Schematic View. Mirror Edges - Allows the user to change locations of, for example, two siding tracks. Round Schema Edge Corners - Allows the user to construct a fillet where there is a break-point on an Edge.
EDI Import/Export	Import EDI - Imports the geometry and topology from Entegro Data File (*.edi) format. Export EDI - Exports all the topology found in the model as Entegro Data File (*.edi) file format.