Dialog Options

Add New: Brings in plan display and adds a new cant point. Station can be selected dynamically or with typing the required value into the manipulator.

Delete: Removes the selected cant point. If the selected cant point is a calculated point, this option will be grayed out, as calculated points cannot be deleted (they will be recreated automatically upon any change in the geometry). Use Disable Cant Point option for removing calculated points from cant application.

Fit: Fits plan view to the cant region extends.

Toggle Cant Diagram: Toggles cant diagram display On/Off

Validate Data: Shows data validation table. Validate Data interface enables defining minimum and maximum values for cant values. Table cells will be highlighted based on these defined ranges.

Add Existing Cant: Superimposes existing cant values onto the cant diagram. Requires selecting Left and Right rails in the plan view.

Toggle Existing Cant: Toggles existing cant in the diagram On/Off, if available.

Toggle Highlighting: Toggles the highlighting of selected cant row in the cant diagram. Toggling the highlighting off improves cant table performance.

Clear All Warnings: Clear all cant warnings. Cant warnings can also be cleared for single rows by right clicking on the row and selecting Clear Warning.

Refresh Cant: Refreshes all cant calculations, preserves user changes and fixed points. Useful when a change of origin geometry, in case of projected cant, is not reflected in the cant calculations or cant rule is reactivated and an update of the cant calculations is needed.

Show/Hide Disabled Cant Points: Shows or Hides disabled cant points. To learn more, please see Disable Cant Point.

Deactivate/Activate Rule: Deactivates/Activates cant rule. When deactivated, changes in the underlying geometry will not update the cant values.