Defects Fixed in 2025 Release
This section provides a list of defects that have been resolved in this release of OpenSite Designer, OpenRoads Designer, OpenRail Designer, and OpenRail Overhead Line Designer.
| ServiceNow Case ID | Area | Title |
|---|---|---|
| CS0367390 | Analysis Tools | Analyze point is not working for elevation |
| CS0386926 | Analysis Tools | Crash running Analyze Trace Slope with constant slope trace mode |
| Analysis Tools | End Area Volumes report incorrectly shows volume of 0.0 for some corridor components. | |
| CS0401228 | Analysis Tools | Importing specific SDF file caused an exception when using the Terrain from HEC-RAS Data tool. |
| CS0134509 | Analysis Tools | Sight visibility report missing stations. |
| CS0387584 | Analysis Tools | Trace slope direction not following up/down settings in the dialog |
| Analysis Tools | Tracking and Analysis dialog in the Multiple Profiles tool was missing and misreporting some values. | |
| Annotation | Annotating high and low points on linear elements not working. | |
| Annotation | Cant annotation displays duplicate text values in a profile. | |
| Annotation | Civil Labels across references are broken when upgraded from 2023 to 2024U2 | |
| Annotation | Crash creating a new text favorite with an Item type. | |
| Annotation | Crash using "Annotate- All elements in Model" for D&U elements | |
| Annotation | Crash when annotating cross-section drawings using labels | |
| Annotation | Crashe opening Text Favorite Manager. | |
| CS0144910 | Annotation | CTL+Z undoes everything in file after making a text edit. |
| Annotation | Drawing model annotations are missing when sheets are created in a new file. | |
| Annotation | Point Surface Z Elevation Difference text field not returning proper value | |
| CS0185408 | Annotation | Profile Tangent Length Value is not matching with Profile Report |
| Annotation | Remove Element Annotation does not remove annotations applied via Annotation Override | |
| CS0136368 | Annotation | Remove Element Annotations not working across references. |
| CS0024902 | Annotation | Shape Property Text Favorite was not working. |
| Annotation | Titles are not displayed under cross section and profile framed annotation | |
| CS0060038 | Annotation | View Independent curve label text rotates when it shouldn't. |
| Annotation | When importing from ALG the first 2D point is in the 2D model and subsequent points in the 3D model with elevation 0. | |
| Civil File Manager | Civil File Manager crashes on expansion after schema check | |
| Civil File Manager | While downgrading files the Civil File Manager shows message "Invalid Destination File Name" | |
| Drainage and Utilities | [Crash on Relocating the Node | |
| Drainage and Utilities | [Workspace] [D&U] User-defined Conduit is missing in the Training Imperial Workspaces (it's in the Metric Workspace) | |
| Drainage and Utilities | “Match Slope of Conduit” was not available in the properties of a headwall feature definition | |
| Drainage and Utilities | 3D Cut Increases the Length of a Node in the Profile Model | |
| Drainage and Utilities | Added "Delineate Catchment" functionality to Cross Section and Headwall nodes (in support of new OpenFlows functionality) | |
| Drainage and Utilities | Added "Existing" to the list for Operational Status | |
| Drainage and Utilities | Added Analyze Catchment to the D&U Tools Ribbon | |
| Drainage and Utilities | Added OpenFlows Cross Section functionality | |
| Drainage and Utilities | Address Incorrect Conduit Representation when Connected to Node Center | |
| Drainage and Utilities | Application crashed on changing the Outfall feature definition to Inlet which is having a Profile opened. | |
| Drainage and Utilities | Applying Second bend in a conduit causes a crash if the Profile Model is open though Open Profile Model tool. | |
| Drainage and Utilities | Assign Taps to Links doesn't update the geometry for all Laterals | |
| CS0450492 | Drainage and Utilities | Can't edit node elevation after placement |
| Drainage and Utilities | Can't Manipulate the Vertices on a Delineated Catchment | |
| Drainage and Utilities | Can't use Baseline UDX in a Formula UDX | |
| CS0447534 | Drainage and Utilities | Changing pipe slope in profile run works differently than changing slope for a separate pipe |
| CS0264920 | Drainage and Utilities | Changing the Conduit Size does not change Conduit Wall Thickness |
| Drainage and Utilities | Channel placed between two Cross Sections from Surface - Doesn't Update after Referenced Corridor is Changed | |
| Drainage and Utilities | Channel that's connected to an inlet needs to use the ground elevation of the inlet | |
| CS0412564 | Drainage and Utilities | Conduit In Invert Value incorrect |
| Drainage and Utilities | Conduit Loses Connection to Connection Point when the Node Feature Definition is Changed | |
| CS0283680 | Drainage and Utilities | Construction Slope being reported for Gutters |
| CS0204942 | Drainage and Utilities | Corrupt Drainage DGN |
| CS0085056 | Drainage and Utilities | Crash and "No Prototype" errors in Place Nodes command. |
| Drainage and Utilities | Crash importing a drainage LandXML file a second time after deletion into a dgn | |
| Drainage and Utilities | Crash when changing the Point Constraint of a Node connected to a conduit having Trench | |
| Drainage and Utilities | Crash when connecting the storm conduit with the node | |
| CS0157163 | Drainage and Utilities | Crash when trying to insert node |
| Drainage and Utilities | D&U Node Rotation Changing after Scenario Run | |
| Drainage and Utilities | Delineated catchments are not in sync with 2D and 3D | |
| Drainage and Utilities | Diameter property is not visible when a D&U DGN is referenced | |
| Drainage and Utilities | Display Rule using "Operational Status" causes a Crash | |
| CS0357723 | Drainage and Utilities | Drainage File Crashes on Opening |
| CS0307216 | Drainage and Utilities | Drainage Node + Item Type, Not Evaluating/Populating Fields |
| CS0448015 | Drainage and Utilities | Engineering Profiles Annotation Settings do not carry over/apply to other profiles when saved |
| CS0217555 | Drainage and Utilities | Exception log Place Node Drainage Manhole |
| Drainage and Utilities | Files become corrupt when using ProjectWise "Update Server Copy" then freeing the file | |
| Drainage and Utilities | Filter Manager - The properties are blank when creating a new filter or filter group | |
| CS0017110 | Drainage and Utilities | Fitting node not working like in 10.10 |
| CS0317509 | Drainage and Utilities | HGL displays incorrectly in profile run view |
| Drainage and Utilities | Hydraulic Run from Node doesn't Include a Pond | |
| CS0292564 | Drainage and Utilities | Incorrect C-value and area calcs - Catchments & Land Use Areas |
| CS0428109 | Drainage and Utilities | Incorrect Outgoing Conduit Angle |
| Drainage and Utilities | Insert Bend does not honor a Tentative Snap or AccuSnap | |
| Drainage and Utilities | Length (Unified) and Slope (Calculated) of a link are zero in the referenced data | |
| Drainage and Utilities | Links are not honoring the nodes on graphical editing in Profile Model | |
| CS0272140 | Drainage and Utilities | Missing dynamic relationship between the laterals and the trunk/mainline |
| CS0462726 | Drainage and Utilities | Modified Basket-Handle Conduit is placed at the wrong elevation in the 3D model |
| Drainage and Utilities | Need a "Feature Definition (Short)" UDX, for Analytic Symbology | |
| Drainage and Utilities | Need to Reset Node Invert with a Sump when a Conduit is Removed | |
| Drainage and Utilities | Network Corruption/Exception on Profile healing where the network is having 2 Outfall with Profile run for each Outfall | |
| Drainage and Utilities | New SewerGEMS functionality to update a catchment to a sag inlet isn't working in ORD | |
| Drainage and Utilities | Object Error on computing the Scenario | |
| Drainage and Utilities | Opening the OpenFlows Profile Views causes Exceptions | |
| Drainage and Utilities | Pipes not Clipped Correctly to Nodes | |
| Drainage and Utilities | Place Conduit doesn't work with Civil Accudraw | |
| CS0012238 | Drainage and Utilities | Place Node, Rotation Mode: Relative to Alignment will not place node from alignment selected within a dgn with no civil element or prior civil element |
| Drainage and Utilities | Placing a Gutter using Between Nodes can crash | |
| Drainage and Utilities | Profile is not drawn if link has bends and is placed at connection points | |
| CS0346597 | Drainage and Utilities | Profile node draw type box (and others beside slice) draws to ground elevation when Set Rim To Ground Elevation is False |
| CS0291535 | Drainage and Utilities | Project Run is not Projecting the Network correctly |
| CS0269814 | Drainage and Utilities | Projecting Referenced Profile Run doesn't show the HGL |
| Drainage and Utilities | Setting sump depth on node when use sump depth is false lowers the invert | |
| Drainage and Utilities | Some conduits aren't clipped correctly to the End Walls when "Match Slope of Conduit" is True | |
| CS0446521 | Drainage and Utilities | Station equations causing drainage nodes to report incorrect baseline station |
| Drainage and Utilities | The profile representation of the end walls isn't correct when "Match Slope of Conduit" is True | |
| Drainage and Utilities | The Utility Run from Links is giving wrong profile if the node is connected with more than 2 links | |
| CS0381294 | Drainage and Utilities | Unified Length is not matching between Civil Properties and Utility Properties panels |
| File - All other file issues | Attaching multiple references at once fails | |
| File - All other file issues | Copying Civil Elements into to a DGN over a ref. Pulls in Schemas and brands file | |
| File - All other file issues | Crash compressing file with option to delete unused item types toggled on | |
| CS0353975 | File - All other file issues | Crash opening specific dgn |
| File - All other file issues | Crash updating standards from dgnlib | |
| CS0069210 | File - All other file issues | Unable to open file and Software is crashing. |
| File - DWG | Attaching a DWG, which require Object Enablers will crash the application | |
| File - DWG | Crash selecting element in DWG with property dialog open | |
| File - DWG | DWG Reference Scale Not Retained | |
| File - DWG | Item types aren't being exported to DWG blocks' attributes | |
| Geometry - Linear | 3D Manipulators at zero elevation for nodes at elevation (100), | |
| CS0250884 | Geometry - Linear | Add Internal Station Equation does not work when target alignment is ruled to reference alignment. |
| CS0390893 | Geometry - Linear | Alignment Breaks When Changing the Radius |
| CS0183697 | Geometry - Linear | Arc between elements - Spiral with A Value- when one element is line and the other an arc |
| CS0043389 | Geometry - Linear | Arc Equation Value Text Favorite changed to "Back" does not propagate for alignments imported from GPK |
| Geometry - Linear | Complex redefine fails to work when extended elements are linked to complex and redefining geometry | |
| CS0382500 | Geometry - Linear | Complex Redefine in profile doesn't work. |
| Geometry - Linear | Complex Redefine leaves behind interval in profile when Break the active profile in the redefining range is checked | |
| Geometry - Linear | Crash in table editor after select alignment that isn't valid for the tool | |
| CS0368417 | Geometry - Linear | Create 3D Automatically is not working using offset tools |
| Geometry - Linear | Dropping complex linear geometry crashes the product. | |
| CS0129339 | Geometry - Linear | Elevations (designated by -999) are not importing from Genio files |
| CS0256335 | Geometry - Linear | Fix Profile view maximization issue when opening model |
| CS0226589 | Geometry - Linear | Geometry > Transform Tool crashes when TIC mark is included in selection set. |
| Geometry - Linear | Geometry Connector is changing length of a fixed Line element | |
| CS0179193 | Geometry - Linear | Geometry Connector not working if horizontal geometry is not a Complex Element. |
| Geometry - Linear | Geometry Connector: last element of the list not updated on computation | |
| Geometry - Linear | Hovering over rails using the table editor tool while active crashes the product. | |
| CS0095988 | Geometry - Linear | Importing TSP with NSW Parabola have issues in the geometry when civil rules is checked |
| CS0095988 | Geometry - Linear | Importing TSP with NSW Parabola will create Integrity issues in the geometry |
| CS0459654 | Geometry - Linear | Line from Element tool is not working when tracing the line graphically |
| Geometry - Linear | Multiple Profiles - Tracking and Analysis getting confused when there are geometry gaps | |
| Geometry - Linear | Offset set for Back/Ahead Taper is wrong with Taper Arc Taper placement | |
| Geometry - Linear | Performance degradation during Geometry File Import | |
| Geometry - Linear | Profile Complex by PI - Locked Slope value is Ignored on Datapoint to Place a PI | |
| CS0167474 | Geometry - Linear | Profile Reverse Transition tool does not work when we define Vertical Curve Parameters and Length of the Tangent in between the curves. |
| Geometry - Linear | Rail - Geometry Connector > Crossing to Crossing connection isn't saving the First Crossing in the computed location. | |
| CS0428784 | Geometry - Linear | Set As Active Profile Exception |
| Geometry - Linear | Simple geometry modification is having too much performance lag with user data | |
| CS0360331 | Geometry - Linear | Single Offset commands develops exception error after upgrading from 10.12 to 2023 or 2024 |
| CS0421115 | Geometry - Linear | Single Offset Partial element has incorrect stationing when the reference element is in a reference file |
| Geometry - Linear | Table editor not honored for complex element created from MSTN smart line tool. | |
| Geometry - Linear | Table editor working on Offset ruled geometry, causing unhandled exception and crash proceeding further with simplify geometry | |
| CS0455238 | Geometry - Linear | Tangent snap to perpendicular snap not working |
| CS0451872 | Geometry - Linear | Transform Tools interaction with Persist Snaps |
| Geometry - Linear | Trimming a complex is forces corridor reprocess | |
| Geometry - Linear | Unable to select the reference profile as new path element for Geometry replacement | |
| CS0472536 | Geometry - Points | The results are incorrect when using Single Offset Entire Element with remove offset rule on and the geometry has circle segment |
| CS0369837 | Geometry - Regression | Adding vertical geometry to the regression complex, the regression table is reporting the Radius Value as 0m. |
| Geometry - Regression | Complex Table shows radius mismatch | |
| CS0396238 | Geometry - Regression | Regression Complex Table shows differently than Integrity Report |
| Geometry - Regression | Regression points table: existing cant at point n is incorrect. It is showing value at point n+1 | |
| CS0252540 | Item Types | After adding a clipping reference on a corridor, MicroStation Reports doubles every Item Type. |
| CS0381060 | Item Types | Can not see Drainage single source of truth Item Type properties across a reference |
| CS0381060 | Item Types | Civil labeler doesn't work for Drainage single source of truth Item Type properties when in a plan view drawing model. |
| CS0372530 | Item Types | Incorrect precision in Item Type reports |
| Item Types | Item type properties sometimes not displayed when in reference | |
| CS0069227 | Item Types | Item Types Report - All units of aggregates show unit from the first item reported |
| CS0343876 | Item Types | Item Types applied to non-civilized elements cannot be Annotated or selected from Insert Field in Place Text |
| CS0307216 | Item Types | Not all of the item types are shown when the drainage is referenced into another file |
| CS0017020 | Item Types | OpenRoads exits when opening this 10.12 data. Something to do with Item Types |
| Item Types | Text Favorite Manager should accept custom property type for item types. | |
| CS0120190 | MicroStation Tools | Crash when trying to create .3SM file in ProjectWise. |
| CS0397118 | MicroStation Tools | Crash when zooming in and out (File Specific) |
| CS0196446 | MicroStation Tools | Panning and tentative snap in 3D model causes file to hang. |
| MicroStation Tools | Product throws exception after clicking on File>Settings>Configuration>Customize | |
| CS0013361 | Modeling | Check Integrity Fails With "Encounter a QualifiedRelationEmbedding which points to null" in Component |
| CS0013361 | Modeling | Check Integrity Fails With "Orphan corridor ingredient" in Base Corridor Element |
| Modeling | Component Mesh with same name but different type in different template drops do not always construct correctly and yields incorrect volumes | |
| Modeling | Corridor 3D and Profile 3D cut yields incorrect results | |
| CS0096241 | Modeling | Corrupt ITL crashes ORD when opening |
| Modeling | Crash after navigating through dynamic XS, closing the file and reopening in same session of the product | |
| Modeling | Crashes in Dynamic Cross Sections view when selecting the view | |
| Modeling | Create Corridor and template drop, undo will crash product | |
| Modeling | Dark Themed UI leaves corridor rows blank within the Corridor Objects and Superelevation dialog boxes | |
| CS0312452 | Modeling | Exception error when adding a parametric constraint to corridor |
| CS0364913 | Modeling | File Crash when reference is attached |
| CS0272653 | Modeling | File crashing when processing corridor |
| CS0366060 | Modeling | Graphics from Profile From Surface do not align with 3D cut graphics in profile model |
| CS0226655 | Modeling | Mesh Display changes each time Corridor is Processed |
| Modeling | Multiple Tunnel clipping references cause an exception | |
| Modeling | Overlay Component does not have volumes in some situations | |
| CS0301066 | Modeling | Place civil cell crashes OpenRoads Designer. |
| CS0144759 | Modeling | Project to surface constraint not working |
| CS0139012 | Modeling | Unable to add parametric constraints nor point controls without crashing. |
| Named Boundaries and Sheets | Create 3d cut, with a named boundary in the profile model, throws an exception | |
| Named Boundaries and Sheets | Delete - Undo - Redo Name boundaries crashes the product | |
| CS0399357 | Named Boundaries and Sheets | Deleting and adding sheet properties from the Manage Sheet Index causes inconsistencies |
| CS0431496 | Named Boundaries and Sheets | Profile Named Boundary Vertical Exaggeration does not change with selection of drawing seed |
| CS0182293 | ProjectWise Integration | Civil File Manager crashes in PW when unable to resolve reference. |
| ProjectWise Integration | Civil File Manager is not bringing PW login dialog to access PW files | |
| Rail - Cant and Speed Tables | ALG-LandXML not importing all horizontal elements when civil rules are applied | |
| Rail - Cant and Speed Tables | Assign Cant to corridor dialog cannot be resized | |
| Rail - Cant and Speed Tables | Cant and geometry decorators are hidden by background map | |
| Rail - Cant and Speed Tables | Cant constants are incorrectly imported in imperial | |
| Rail - Cant and Speed Tables | Cant Import Cant Points does not work with external station values | |
| Rail - Cant and Speed Tables | Cant import tolerance not available for geometry import | |
| Rail - Cant and Speed Tables | Cant points can be added outside of cant range. | |
| Rail - Cant and Speed Tables | Cant points should be disabled when cant is imported | |
| Rail - Cant and Speed Tables | Cant rounding constant does not follow the standard defined in configuration | |
| Rail - Cant and Speed Tables | Cant virtual point does not get applied correctly when start point is away from start of geometry | |
| Rail - Cant and Speed Tables | LandXML export does not include both cant constants | |
| Rail - Cant and Speed Tables | Projected cant does not work when cant is in reference and results in exception | |
| Rail - LVA, Topology and Schematics | Clearance Point 3D elevation and Rotation is wrong | |
| Rail - LVA, Topology and Schematics | Equipment rotation relative to centerline not being updated when equipment is moved down centerline | |
| Rail - LVA, Topology and Schematics | LVA Connection Point element is using Plan Element Template in 3D | |
| Rail - LVA, Topology and Schematics | LVA Equipment does not get added to schematic view if it is reset or created post placement | |
| Rail - LVA, Topology and Schematics | LVA Equipment: Confusing display of rotation parameters in properties section | |
| Rail - LVA, Topology and Schematics | LVA: Dynamic Rotation Manipulators are not updating the 3D in Absolute mode | |
| Rail - LVA, Topology and Schematics | Relative placement breaks when modified in 3D using manipulator | |
| CS0106817 | Rail - Other | Export to toporail (.xtr) format |
| CS0371620 | Rail - Other | Start screen > 'Are you new to OpenRail Designer?' Wrong URL in link next to 'Learn the basics..' |
| Rail - Rails and Sleepers | Create Rails, Sleepers, Joints and Signal tools does not work when 3D model is absent | |
| Rail - Rails and Sleepers | Exception thrown when generating LRM Report | |
| CS0202896 | Rail - Rails and Sleepers | Volume of sleepers does not change beyond 1000 sleeper counts |
| CS0330366 | Reports | Cant alignment broken when exported and reimported |
| Reports | EAV report fails to save with Excel format selected | |
| Reports | In the imperial workspace Validate Regression report is incorrectly converting distance and deviation values from feet to metric units | |
| CS0344595 | Reports | Incorrect Arc Chord Length in Deed Writer Tool |
| CS0330533 | Reports | OpenRail Designer miscalculates the values of Vertical Clearance when using Station Offset Report |
| INC0294450 | Reports | OpenRoads station offset report not reporting start and end |
| Reports | Reversing selection of components changes Offset and Offset Station values for Event Points | |
| CS0330375 | Reports | The cant values will change after chainage equation is added. |
| Reports | Vertical Alignment Report not reporting correctly for stepped vertical alignments | |
| CS0367603 | Reports | Wrong color coding in Horizontal Alignment Check Integrity Report |
| CS0187153 | Superelevation | Superelevation Editor > Cannot specify length for parabola transition type |
| CS0383753 | Survey | Crash running Move/Copy Parallel tool with mode set to Round on referenced Survey linear features. |
| CS0173063 | Survey | Element causing crash. |
| CS0249098 | Survey | Modifying a survey element (graphic) changes the coordinate of the element's starting point. |
| CS0428987 | Survey | Opening survey file does not process or allow for edits |
| CS0101921 | Survey | Rod Height changing when a FWD file is imported. |
| CS0283962 | Survey | Rod height wrong from txt import wizard |
| CS0413793 | Survey | SDR import ignoring rod height |
| Survey | Survey Linear Features Text Manipulators for linking codes are not being displayed | |
| CS0207535 | Terrain | Cannot create complex terrain from another complex terrain |
| Terrain | Contour graphics do not updated when Element Template changes | |
| CS0396840 | Terrain | Create Clipped Terrain Model crashes with method set to External |
| CS0220267 | Terrain | Create Complex Terrain Model crashes when terrain is in a reprojected reference attachment |
| CS0364875 | Terrain | Exception logged after clicking referenced terrain |
| CS0201985 | Terrain | Extra triangles when importing terrain |
| CS0320645 | Terrain | Geometry > Append Element Crashes DGN after selecting complex alignment |
| CS0341584 | Terrain | Import LandXML error |
| CS0221044 | Terrain | Issue with triangulation after adding the boundary to the survey data |
| CS0195540 | Terrain | Survey Point Features Disappearing After Creating Terrain from Graphical Filter |
| CS0156381 | Terrain | Terrains will not merge into Complex Terrain |
| Terrain | Topo Import>Esri Terrain: Getting message: ArcGIS Portal>Error>Invalid Client_id>Error:400 | |
| CS0389963 | Terrain | Transform element not transforming terrain |
| UI | Corridor Component Report dialog doesn't display all values in dark theme. | |
| UI | Editable values in the Event Point List are white against a white background when using Dark Mode | |
| UI | Import geometry dialog should not show cant in Road product | |
| CS0430869 | UI | Right to left view attribute Performance issues |
| UI | Survey details dialog has a text visibility issue when running in dark mode | |
| CS0232596 | Workspace | Feature Definition and Feature Symbology dgnlibs are not loading in the correct order if no Annotation Group is found |