Attach Classifier to Reality Mesh

Used to attach a new classification to the selected reality mesh by selecting any element within the classification.

You can open this tool from the following:
  • Ribbon: Drawing > Attach > Reality Mesh > Attach Classifier
  • Reality Mesh Attachment dialog: Click the Attach Reality Mesh Classifier icon
Setting Description
Type Sets the type of content used for classification. Options are:
  • Model - Selects the entire model (or referenced model).
  • Element - Selects the element.
  • Named Group - Selects the element's named group.
  • Level - Selects element's level.
Name Sets the name of the classifier.
Margin Distance Specifies a distance to expand (if positive) or reduce (if negative) the classification boundary. For certain boundaries, such as building footprints that may lie directly on the edge of the enclosed volume, specifying a small margin value can avoid undesirable clipping at the boundary edge. A negative margin distance will omit a small volume between adjacent boundaries.
Key-in: MRMESH CLASSIFIER ATTACH