Import Template from Graphics
Used to import the template in the Create Template command.
You can access this tool from the following:
After graphically creating a template and identifying the active selection set, use this command to import the template in the Create Template command.
Parameters | Settings |
---|---|
Type |
Displays the type of template that to import. Template and End Conditions - indicates a template with left and/or right side end conditions. Template - indicates a backbone template. End Condition - indicates an end condition component. |
Vertical Exaggeration of Graphics |
When specifies the vertical exaggeration of the original graphics. Y values are divided by this value when graphics are imported in the template. |
Minimum Chord Length of Curved Elements |
When specify the value by which to reduce the number of created points. This setting takes the complex shapes or curved element (or all elements when contained within a complex element) and strokes the element based on the File > Project Options> Tolerances> Horizontal Chord Height value. Points of the template are then placed at the stroked vertex of the closest point exceeding the distance entered here as the minimum chord length. |
Constrain Points to Origin Point |
When checked on all points will be constrained to the origin point via a horizontal and vertical constraint |