Create Coach Sweep

You can access this dialog from the following:

Ribbon: OpenRail Modeling > Miscellaneous

The Sweep Envelope tool calculates approximate corridor swept by rolling stock represented by single coach.

It is not a kinematic envelope calculation tool. It attempts to calculate true swept corridor including rail head wear or rail side wear or all other parameters defined in respective norms. It calculates only area swept by freely rolling stock. That means calculation in sequential manner location of bogies lying on rails determining 3D position of entire rolling stock item. Sections generated at different stations along centerline being sum of rolling stock item sections in different rolling stock locations and eventually stitching per station generated sections into volumetric mesh representing swept corridor.

Coach Definition

Setting	Description
Coach Definition Method	Rolling stock may be defined in two ways. The simplified method assumes rectangular shape of rolling stock section (Longitudinal and rectangle) and the more advanced method (Longitudinal and template) uses custom rolling stock section.
Height	Height of rolling stock.
Width	Width of rolling stock.
Elevation	Elevation or rolling stock.
Bogie Base	Location of bogies. Required to define 3D model of rolling stock.
Rear Extension	Rear extension of the rolling stock from bogie location.
Front Extension	Front extension of the rolling stock from bogie location.

Computation Parameters

Setting	Description
Section Interval	Defines distance between consecutive locations where sections used for generation mesh representing swept extent are generated.
Coach Sampling	Defines locations used for placement of rolling stock used to generate individual mesh sections.

Note: When tracking along an alignment, use F11 to include active Cant, Speed and Radius reading in Analyze Point.