Extend Turnout by Curve
You can access this dialog from the following:
The Extend Turnout by Curve dialog displays.
Prompt |
User Action |
Select a turnout or crossing. |
Datapoint to specify the turnout or crossing element. |
Thru point or radius. |
A dynamic image displays in the active view. Datapoint to specify the thru point or radius or specify a radius value in the Extend Turnout by Curve dialog. |
Arc Length |
Datapoint to specify Arc Length. |
Arc Sweep Angle |
Datapoint to specify the angle of the Arc Sweep. |
End Tangent Direction |
Datapoint to specify the end direction of the arc. |
Enter end point. |
Datapoint to specify the end distance. |
Select a turnout or crossing element.
Specify the thru point or radius.
Specify the end point.
This adds a separate ruled Element from the Turnout which can be complexed as an alignment to include the turnout geometry.
For more information, see: Arc From Element