3D Geometry 3D Tools
Contains tools for drawing Civil 3D elements , applying linear and surface templates. Other tools include 3D by Volume (useful for pond design) and 3D By Slope to Target.
You can access this tool from the following:
Ribbon: OpenRoads Modeling > Model Detailing > 3D Tools
Select in the Toolbox |
Description |
Accesses the Pick Template dialog then inserts the chosen template into the drawing relative to a linear element. |
|
Accesses the Pick Template dialog then inserts the chosen template into the drawing relative to a terrain model. |
|
Create Closed Mesh | Allows you to create closed mesh entities representing substrata, unsuitable materials, and variety of Design artifacts. |
3D Elements |
Create 3D By Slope To Target - Creates a 3D element computed from a linear element to a surface. Create 3D By Volume - Creates a terrain modeling computed by volume from another reference surface. Create 3D By Drape to Surface - Create 3D by Drape to Surface element from a portion of an surface element. Create 3D By Plan Profile - The Create 3D by Plan Profile tool creates a 3D element from a portion of a profile line. Plan By 3D Element - Creates a 2D element from a 3D MicroStation element and utilizes the original 3D element for the active profile. |
Create Conic Slope | Creates a Conic slope between selected parameters or elements. |
Transverse Tools
|
Create Transverse Alignment -Creates a alignments between 2 main alignments that run usually parallel. Create Transverse Tunnel - Creates a tunnel between 2 main tunnels that run usually parallel. |