To Install OpenPlant Support Engineering

Note: To discontinue installing the product at any time, click Cancel.

In an Explorer window, double-click the OpenPlant Support Engineering setup executable.

The OpenPlant Support Engineering Installation Wizard opens and checks if the required Windows KBs are installed on your machine. If not, you will get an error message with a link to know more about Windows KBs and download them. OpenPlant Support Engineering can be installed only after you install the required Windows KBs.
To read the End-User Licensing Agreement (EULA), click the Licensing Terms link.

The End-User Licensing Agreement opens in a web browser.
After reading the license agreement, turn on the I accept the End User Licensing Terms check box if you understand and agree to the License Agreement Terms and Conditions.

Note that agreeing to the license agreement is required in order to install the product. Turning on the check box displays the Cancel and Install buttons at the bottom of the wizard.
Click Install.
Click Finish.
Optional: To make changes to the default OpenPlant Support Engineering Configuration:
1. Click the Configure button next to OpenPlant Support Engineering . The Application Install Location page opens.
2. To change the path where OpenPlant Support Engineering is installed, click theBrowse button next to the Application Path field.
  
  In the Browse For Folder dialog that opens, browse to the drive and folder where you want to install OpenPlant Support Engineering , then click OK.
Optional: Install LumenRT as a companion applicalication using the link provided.
Click Next. The Configuration page opens.
1. To change the path of Delivered Configuration, click the Browse button next to the Delivered Configuration field.
  
  In the Browse For Folder dialog that opens, browse to the drive and folder where you want to deliver the default Configuration, then click OK. The location of Delivered Configuration should be from the local machine.
2. To set up Custom Configuration, select the Custom Configuration (plus Delivered Configuration) radio button. Then click the Browse button next to the Custom Configuration field.
  
  In the Browse For Folder dialog that opens, browse to the drive and folder where your Custom Configuration is located, then click OK. You can select a network location for Custom Configuration.
  
  Note: For information on Custom Configuration, refer to the topic Configuration Changes.
Click Next. The Features page opens.
1. In the Features list, turn on or off the features, as desired.
  
  Note: ProjectWise Drive will be available in the Features list only for Windows 10 or higher versions.
2. Click Done
Follow steps 2 to 5 mentioned above.

Note: If you uninstall this product through Add/Remove Programs, any files that you created subsequent to the installation of the product will not be deleted. It is recommended that you use Windows Explorer to locate and delete these files, if you so desire.