To Install OpenPlant Project Administrator

  1. In an Explorer window, double-click the OpenPlant Project Administrator setup executable.

    The OpenPlant Project Administrator Installation Wizard opens and checks if the required Windows KBs are installed on your machine. If not, you will get an error message with a link to know more about Windows KBs and download them. OpenPlant Project Administrator can be installed only after you install the required Windows KBs.

  2. To read the End-User Licensing Agreement (EULA), click the Licensing Terms link.

    The End-User Licensing Agreement opens in a web browser.

  3. After reading the license agreement, turn on the I accept the End User Licensing Terms check box if you understand and agree to the License Agreement Terms and Conditions.

    Note that agreeing to the license agreement is required in order to install the product. Turning on the check box displays the Cancel and Install buttons at the bottom of the wizard.

  4. Click Install.
  5. Click Finish.
  6. (Optional) To do Companion Installations (Companion Feature or Companion Product) along with OpenPlant Project Administrator, do the following. (Note that Companion Installations are not available for all products)
    1. Turn on the check box for the desired Companion Installation.
    2. (Optional) Click Configure for the selected Companion Installation. The Installer Wizard displays the configuration settings for the selected Companion Installation.
    3. (Optional) Make the desired configuration settings and return to the Installer Wizard main page.
  7. Optional: To make changes to the default OpenPlant Project Administrator Configuration:
    1. Click the Configure button next to OpenPlant Project Administrator . The Application Install Location page opens.
    2. To change the path where OpenPlant Project Administrator is installed, click theBrowse button next to the Application Path field.

      In the Browse For Folder dialog that opens, browse to the drive and folder where you want to install OpenPlant Project Administrator , then click OK.

  8. Click Next. The Features page opens.
    1. In the Features list, turn on or off the features, as desired.
    2. Click Done
  9. Follow steps 2 to 5 mentioned above.