Component Type Selection Dialog
The Component Type Selection dialog shown below is a common dialog which provides a list of component types to choose from when defining new components using any of the taskbar commands listed below, or by using the key in listed above.
It is also displayed when adding components to an Instrument Loop via the Instrument Loop Tag Creation dialog.
Select the component class to assign and press OK to close the dialog.
| Setting | Description |
|---|---|
| Filter | Use the filter option by entering a string in the
field and clicking the
Apply Filter
|
| Component Class List | The component classes list displays the types of
component classes available to choose from when defining a component. If
creating a component using one of the following commands, the list is filtered
to display only the component classes pertaining to the type of component being
created:
|
| Show All | Used when adding to an instrument loop or when using the keyin option to create a specific component class such as Valve, Instrument, Equipment etc. See the above descriptions for these. If the keyin does not have ALLSCHEMAS appended to it then this option is enabled. Checking this option will make sure all of the classes are displayed from the schemas. |
Key-in: