Nozzles
Used to place pre-defined nozzle symbols in the drawing.
Accessed from:
- PID Equipment ribbon
The following gallery displays which can be left floating or docked to the drawing area.
Select the symbol by clicking the item name or the associated icon. After the equipment symbol is selected, and prior to placing it in the drawing, OpenPlant PID displays the Component Properties dialog prompting you to build a tag number for the nozzle.
Note: If the Tag Dialog
Prompt option is turned off in the
PID
Document dialog's Settings tab, then a default tag number will be used
and the
Component
Properties dialog does not display. The next available tag number in an
incremental sequence is assigned to the component. Properties and tag numbers
can be edited in the Properties dialog after placement.
The following options are available:
- Nozzle
- Nozzle Single
- Nozzle Double
- Coupling
- Coupler
The Nozzles/Coupling symbols require vessel selection (to indicate the item on which the trim is to be placed) and rotation selection prior to placement.
The Coupler can be placed in space or connected to another nozzle. Allows rotational orientation during placement.