To Annotate Multiple Break Properties
Multiple break properties can be annotated using the procedure below. However, the properties must be first pre-configured in the OpenPlant_PID_Supplemental Schema before running this key-in. By default, Specification, Insulation Material and Insulation Thickness is already configured.
- Enter the following key-in: PID insert OpenPlant_Pid PIPING_SPECIFICATION_BREAK_ALT1
- Use the mouse to pick the point on the run where the break is to occur.
- Left-click the mouse to accept the point. The Split Run dialog displays listing the two runs. OpenPlant PID will create a unique name for the second run but all other properties will remain the same.
- To modify one of the runs, select it and click OK. The Properties dialog displays allowing you to define the Spec change.
- Optional: Click the Create new pipeline option if you want to create a new pipeline from the split section instead of a new pipe run. This will display the Pipe Line Tag Creation dialog.
- Define a new value for the Spec and another property that was pre-configured in the Supplemental Schema to be annotated with this key-in.
- Click OK when finished. You can make changes to either run using the Element Info dialog.