Place Parametric Equipment Dialog
The Place Parametric Equipment dialog displays when placing a parametric symbol from the Tanks and Vessels gallery. After defining the tag number and component properties in the Properties dialog, the dialog shown below is for adding the heads and internal components for a vessel.
Heads Tab
The heads tap of the dialog shown below provides fields to define the type of head you have selected for the vessel. The Parametric Image in the pane to the right changes dynamically as you enter new values in the fields.
Setting | Description |
---|---|
Elliptical Heads |
Top/Left: Defines the height of the top elliptical head. Bottom/Right: Defines the height of the bottom elliptical head if applicable. |
Floating/Cone Roof |
Gap: Defines the gap between the floating roof and the vessel. Depth: Defines the depth of the floating roof. Cone Height: Defines the height of the cone head. |
Flange |
Gap: Defines the gap between the top flange and the vessel. Extend: Defines the flange width, or how much it extends past the vessel sides. |
Water Seal |
Gap: Defines the gap between the side of the water seal and the vessel wall. Depth: Defines the gap between the water seal and the bottom of the vessel. Seal Height: Defines the height of the water seal side wall. |