Hanging Tray Supports
The Center Hung and Trapeze tray supports are designed as a hanging support which connect to a structure overhead. With these supports, the Properties dialog provides options to define the parameters of the support bar and the hanging rods as shown below with the Trapeze support:
In the dialog, the definable fields under the Parameters section determine the dimensions of the support.Setting | Description |
---|---|
Rod Length | Defines the length of the rods used for either the Trapeze or Center hung supports. |
Rod Diameter | Defines the rod diameter. |
Rod Extension | Defines the distance beyond the support frame the rod(s) will extend when placing either Trapeze or Center hung supports. |
Rod Inset | For Trapeze supports, defines the distance from the end of the support frame the rod is inset. |
Spacing | This defines the space in between supports along the length of the selected tray. If the value is 0, then a single support is placed. If a value is defined here, for example 48", then a support will be placed every 48" along the length of the tray. |