When you place HVAC Supports, one of the following two properties
dialogs display prompting you to define the parameters for the support. The
parameters are determined by the type of support you are placing.
Setting | Description |
---|
Strap Hanger
|
|
- Width - By
default is determined by the width of the HVAC duct selected, however, this can
be changed if desired.
Note: Define the
remaining parameters as needed.
Setting | Description |
---|
Trapeze Hanger
|
Note: As with the
Strap Hanger, the Width field is determined by the width of the HVAC duct
selected.
- Beam
Profile - Defines the section of the support that runs underneath
the duct and supports it. Select an option from the drop down list to define
it.
|