Axis |
Sets the direction of the axis of revolution.
- Points — Direction of axis is defined graphically. AccuDraw can be used to define the drawing plane on which the points are placed.
- Screen X, Y, or Z — Direction of the axis is set to the screen's X, Y, or Z axis.
- Drawing X, Y, or Z — Direction of the axis is set to the drawing's, or design file's, X, Y, or Z axis.
|
Triangular |
Determines the shape of the wedge. If on, the outer face is flat (a chord of the swept surface). If off, the outer face is rounded. |
Angle |
If on, sets the angle (of sweep). |