Displays when you select the CAD Standards > Tags tab
in the
Options dialog. It lets you to edit/define new or existing
tag styles. There are a number of default tag styles defined, all of which can
be modified, or, new ones can be added.
Setting | Description |
---|
Property
|
In the Property column click the arrow next to the
Tag ID to expand the list of properties to be defined as shown:
Note: The Vertical
Spacing value can be increased/decreased using the arrow buttons which display
in the Value field when you select it.
The property values can be defined using the
following methods depending on what type of value is required:
- Type a value
directly into the field
- Select from a drop
down list of predefined values.
- Use the arrow
buttons in the Value field to adjust the value in increments.
Note: If there are
existing CAD text styles defined in the current drawing, they will be available
from a drop down list to choose from. If one is selected, the remaining
property fields will inherit the properties of the predefined text style.
|
Value
|
In the Value column, enter a value for the adjacent
Property field using the descriptions above.
|
Add
|
Click to add a new line style to the list then
define the name and properties for the style.
|
Delete
|
Click to delete the selected line style.
|
OK
|
Saves the changes and closes the Options dialog.
|
Cancel
|
Closes the Options dialog without saving any
changes.
|
Apply
|
Applies any changes while keeping the Options dialog
open.
|
Multiple Raceway ID
settings
By default there are multiple settings for Raceway ID's
(RW-ID through RW-ID4). Raceway fittings such as bends, tees, and cross overs
are comprised of multiple segments which each get assigned a tag. You can
configure the tags for each segment separately.
For Example: A bend uses two segments and thus would
apply RW-ID and RW-ID1 tag settings to each respective segment.