To Place HVAC Bend Components
Components are
typically connected to other components or placed at known distances to one
another. However, you may want to place a component "in space"; that is, at a
specific location or coordinate with no respect to other component locations.
Note: It is suggested that
the user should be proficient with the AccuDraw tool when routing components in
OpenPlant Modeler
.
Note: If placing a component W.R.T. to the active point of a bend
component, refer to the
Snap to an
Active Point of an Elbow topic for details.
- Open the Standard Preferences dialog and set the HVAC System and component values.
- Select a bend option from the HVAC Elbows gallery. The following options are available:
- Pick one of the following Placement Points for the duct in the Place Component dialog:
- Expand the HVAC Port Settings tab and define the options available for the port end preparations.
- Click the Design Conditions to define the size parameters for the length of duct. (Width, Height, etc.)
- Pick a point in the drawing, or input the (x,y,z) coordinates in the AccuDraw window to determine the placement point. An outline of the component displays.
- Use the mouse to determine the direction for the component.
- Again use the mouse to determine the rotation for the component.
- Right-click to end the placement procedure.