Modifying Existing Reinforcement
Using OpenPlant Modeler rebar tools, you can develop nearly any kind of bar configuration you may need. Stretch bars, trim bars, create non-standard cages and more using these tools.
Tool | Description |
---|---|
Edit Rebar | Used to edit any existing individual rebar in any existing rebar cage. |
Move Rebar | Used to move a single bar or multiple bars contained in a rebar cage. |
Copy Rebar | Used to make a duplicate of an existing bar on your model. |
Delete Rebar | Used to delete individual bars or stirrups from a rebar cage. |
Explode Rebar | Used to break apart rebar cages into individual bars. |
Stretch Rebar | Used to stretch the selected rebar. |
Trim Rebar | Used to trim the selected rebar. |
Extend Rebar | Used to lengthen the selected rebar. |
Break Rebar | Used to break the selected rebar into two segments. |
Break and Joggle Rebar | Used to add a joggle after breaking the selected rebar. |
Heal Rebar | Used to heal a broken rebar. Healing rebar |
Joggle Rebar | Used to joggle-crank and laps to the ends of the selected rebars. |
Create Rebar Lap | Used to Create Rebar Lap Splices at any given point of an existing piece of rebar or rebar cage. |
Edit Single Rebarset | Used to Edit Single Rebarset reinforcement. |
Edit Single Rebarset (key-in only) | Used to Edit Panel and Wall Rebar reinforcement. |
Edit Slab Rebarset (key-in only) | Used to Edit Slab Rebarset reinforcement. |
Polycut Rebarset | Used to cut an opening in a rebarset by an outline. |