Modifying Existing Reinforcement

Using OpenPlant Modeler rebar tools, you can develop nearly any kind of bar configuration you may need. Stretch bars, trim bars, create non-standard cages and more using these tools.

Edit Rebar tools are located on Concrete > Rebar Modification > Rebar ribbon tab.

Tool	Description
Edit Rebar	Used to edit any existing individual rebar in any existing rebar cage.
Move Rebar	Used to move a single bar or multiple bars contained in a rebar cage.
Copy Rebar	Used to make a duplicate of an existing bar on your model.
Delete Rebar	Used to delete individual bars or stirrups from a rebar cage.
Explode Rebar	Used to break apart rebar cages into individual bars.
Stretch Rebar	Used to stretch the selected rebar.
Trim Rebar	Used to trim the selected rebar.
Extend Rebar	Used to lengthen the selected rebar.
Break Rebar	Used to break the selected rebar into two segments.
Break and Joggle Rebar	Used to add a joggle after breaking the selected rebar.
Heal Rebar	Used to heal a broken rebar. Healing rebar
Joggle Rebar	Used to joggle-crank and laps to the ends of the selected rebars.
Create Rebar Lap	Used to Create Rebar Lap Splices at any given point of an existing piece of rebar or rebar cage.
Edit Single Rebarset	Used to Edit Single Rebarset reinforcement.
Edit Single Rebarset (key-in only)	Used to Edit Panel and Wall Rebar reinforcement.
Edit Slab Rebarset (key-in only)	Used to Edit Slab Rebarset reinforcement.
Polycut Rebarset	Used to cut an opening in a rebarset by an outline.