Safety cage
|
When checked, enables the shape controls. The shape
type and class selection lists provide option to set.
All shape attributes are available for selection.
- Shape type – Sets
the shape type for the safety cage (standard, user shapes, etc.)
- Shape class – Sets
the shape type for the safety cage. Class list varies based on the shape type
selection.
- Shape size – Sets
the shape size for the safety cage. Size list varies based on the shape class
selection.
|
Position
|
Sets the positioning of the safety cage according
to the cross beam.
-
Inner Eedge – Inserts the safety cage at
the inner edge of the upright and shows to the inside.
-
Centered
– Inserts the safety cage in axis position on the
height of upright axis.
-
Outer edge – Inserts the safety cage at
the outer edge of the upright and shows to the outside.
|
0 Degree
|
Sets the safety cage rotation. Rotates the shapes
around their insertion axis (in increments of 90°).
|
Mirror
|
When checked, mirrors the safety cage shape along
Y-axis, before insertion.
|
Radius
|
Sets the inner radius of cage stiffeners.
|
No. of rungs
|
Sets the number of vertical beams that form
longitudinal rungs the cage. The bars will be divided regularly on the
resulting semicircle.
|
Lower radius
|
Sets the inner radius at lower edge. Positive radius
value creates a conical cage.
|
Lower distance
|
Sets the distance of the lowest shackle to the next
shackle of the cage. When no conical cage is required, keep the
Lower distance (and
Lower radius) values
0.
|
Depth
|
Sets the depth of the cage according to the ladder.
Please refer to the below figure for the meaning of the other distances.
|
Distance to Floor
|
Sets the distance from the first shackle of the
safety cage to the floor.
|
Distance
|
Sets the spacing between the safety cage
connections. This gives the desired distance of the stiffeners (rings) of the
safety cage. The tool divides the distances between the first and last ring
regularly according to this specification and the values are rounded up or down
correspondingly.
|
Top Distance
|
Sets the distance from the ladder top to the first
shackle.
|