By Assemblies
|
A set of drawings is generated for each assembly.
Detail blocks not assigned to an assembly are not inserted.
|
By Groups
|
A set of drawings is generated for each group.
Detail blocks not assigned to a group are not inserted.
|
Increasing numbers
|
All selected detail blocks are inserted ascending by
their position number.
|
Separated by single, group, view
|
Detail blocks are inserted one after the other
separately. At first, all single parts are inserted, then all groups (without
their single part drawings) and finally the overview drawings. These are
inserted ascending by their position number.
The following options are available in addition as well.
- Single
Parts – The single parts are inserted separated from each other and
ascending by their position number in the following order:
- Shapes
- Poly-plates
- End
and Base Plates
- Stiffeners
- Bent
Shapes
- Other Component Parts
- Groups – Here,
the group details are dispatched on different drawings, separated according to
type:
- Supports
- Cross Girders
- Other Standard Shapes
- Bent Shapes
- Other Groups
- Views – The
views are dispatched as follows:
- Working Areas
- Ground Plan
- Plan View
- Anchorage Plan
|