Spec not automatically
reloaded when changing the value of the ALLOW_BOLT_INCREMENTING configuration
variable.
|
When the value for this
variable is modified, reload the specification in the Standard Preferences
dialog for the changes to be implemented.
|
Weld sizes are larger when an
OpenPlant Modeler
CONNECT Edition Update 6 workset is upgraded to Update 7.
|
Update the following tolerance values in the
Modeler.cfg file available in the
upgraded workset's
Standards\OpenPlant\Modeler folder.
OPM_DEFAULT_WELD_SPHERE_RADIUS =
0.2
OPM_FLANGE_JOINT_TOLERANCE =
0.3
OPM_CONNECTIVITY_TOLERANCE =
0.06
The tolerance values should match the values in
the default OpenPlantImperial workset.
|
OpenPlant Modeler
experiences a significant delay when switching to either
the HVAC or Raceways ribbons. A delay is also experienced when creating a new
HVAC system or Trayline with newly defined associated items.
|
N/A
|
Consistency Checker tree
doesn't appear in Explorer when an
OpenPlant PID iModel is attached.
|
Recreate the OPPID iModel with
an upgraded WorkSet and use them with the latest
OpenPlant Modeler
CONNECT Edition version.
|
OpenPlant Modeler crashes
when Pro-Structure files are referenced.
|
If any exception is observed
install latest prostrutures COE(Cooperative Object Enabler)
|
OpenPlant Modeler hangs upon
selecting a pipeline node or any other node (i.e. Unit, Service or Plant), in
the default Item Tree of the Explorer dialog.
|
- Go to
- Scroll down to
the Display Settings section.
- Set Select
related items setting to
No.
- Click
OK to save the change.
|
Gridline text file is getting
generated in copied-out workspace instead of Managed Workspace location
|
Manually check in updated
gridline text file in Managed workspace from
$(SMC_COLUMNGRID_DEFINITION_EXPORTTEXTFILE)
|
Manipulators are not present
or do not function properly on custom piping components.
|
Use native Microstation
commands like Move, Rotate. Custom manipulators will be implemented in future
releases.
|
OPM Installation will take
more time if "Visualization Content" option is selected in the install dialog.
|
Do not select this option if
not needed.
|
"Drag to slide" or "Move
Components" does not updates the position for Notes.
|
Use "Move" command. Other
editing commands will be supported in future releases.
User Key In after Move operation:
MECHADDIN MigrateNotes
|
Pipeline Manager does not auto
refresh if dgn is changed.
|
Close pipeline manager and
launch again. Autorefresh will be provided in future releases.
|
Copying components from
i-models attached as references is not allowed. Copied components do not show
correct business data.
|
This will be considered for
future releases.
|
Items Browser in the Explorer
dialog does not update itself on file open.
|
Close and relaunch Explorer
dialog to refresh its contents. This will be fixed in future releases.
|
Merge to Master feature is
not supported to copy data from attached files.
|
This will be considered for
future releases.
|
Doing a move component on
elbow component having a weldolet attached leaves the weld between the tap
connection and the weldolet behind.
|
Select all components and
perform Microstation native "move" command.
|
Cannot place flanged valve on
an elbow.
|
Place flange on elbow first.
|
Fence Stretch does not work on
pipes.
|
Adjust pipe lengths using
OpenPlant manipulators.
|
Changing the equipment head
type to Hemispherical and back to Semi-elliptical does not update the graphics
and the dimensions.
|
Will be corrected in future
version.
|
Slope Tool: in some cases
branch components will get deleted where applying slope to those components
would cause a connection error.
|
Will be corrected in future
version.
|
Unit or Service name repeated
in the Pipeline name if service and unit contain hyphen(-).
|
Default parser expression uses
hyphen as delimiter to separate service, unit and number. If you use a hyphen
in the name for these, parser expression gets confused: "
^[?\w]*-[?\w]*-(?[?\w]*)-(?.*)|(?.*) " If you need to use hyphen in tag name,
you will need to update the parser expression accrodingly.
|
Select pipe incorrectly
prompts for placing custom elbow support and unable to place it on Elbow
|
|
Known limitations to consider
when attempting to place a User Custom Component.
- Joint validation
is not handled.
- User cannot
toggle ports of placed custom components, all custom components are placed by
main port.
- Fit to Fit
placement does not provide any rotation options.
- Replacement of
placed custom component is not supported.
- When attempting
inline placement, code does not validate collinearity of custom component
ports.
|
|
Custom component graphics
scale when modifying any property using ModifyTool given model containing
custom component graphics in cel library was created using non project 3d seed
file, using the project seed file "pmseed3d.dgn" in respective project
workspace folder will not result in this issue.
|
Will be fixed in future
version.
|
To ensure valid connectivity
of custom piping components the main port and custom component origin should be
at the same location.
|
|
PSDS and PDx upgrade menu is
not available in OpenPlant Moder CONNECT
|
Use latest OpenPlant Modeler
V8i SS6 to migrate PSDS and PDx Data.
|
'Place Component from cell'
tool only allows the placement of components that are created by
OpenPlant Modeler
|
Use 'Place Active Cell' tool
for all generic cell placement.
|
Copied
U Bolts which are placed from
"Engineered Supports" ribbon menu within
OpenPlant Modeler
does not relate to pipes, hence they do not get displayed
on ISO.
|
Will be corrected in future
version.
|