To Install OpenPlant Isometrics Manager
-
In an Explorer window, double-click the
OpenPlant Isometrics Manager setup executable.
The OpenPlant Isometrics Manager Installation Wizard opens and checks if the required Windows KBs are installed on your machine. If not, you will get an error message with a link to know more about Windows KBs and download them. OpenPlant Isometrics Manager can be installed only after you install the required Windows KBs.
- (Optional)
To do Companion Installations (Companion Feature or Companion
Product) along with
OpenPlant Isometrics Manager, do the following. (Note that Companion
Installations are not available for all products)
- Turn on the check box for the desired Companion Installation.
- (Optional) Click Configure for the selected Companion Installation. The Installer Wizard displays the configuration settings for the selected Companion Installation.
- (Optional) Make the desired configuration settings and return to the Installer Wizard main page.
- (Optional)
To make changes to the default
OpenPlant Isometrics Manager Configuration:
- Click the Configure button. The Application Install Location page opens.
-
To change the path where
OpenPlant Isometrics Manager is installed, click the
Browse button
next to the
Application Path field.
In the Browse For Folder dialog that opens, browse to the drive and folder where you want to install OpenPlant Isometrics Manager, then click OK.
- Click Next. The Configuration page opens.
-
To change the path of Delivered Configuration, click the
Browse button
next to the
Delivered Configuration field.
In the Browse For Folder dialog that opens, browse to the drive and folder where you want to deliver the default Configuration, then click OK. The location of Delivered Configuration should be from the local machine.
-
To set up Custom Configuration, select the
Custom Configuration (plus Delivered
Configuration) radio button. Then click the
Browse button
next to the
Custom Configuration field.
In the Browse For Folder dialog that opens, browse to the drive and folder where your Custom Configuration is located, then click OK. You can select a network location for Custom Configuration.
-
Click
Next.
The Features page opens.
- In the Feature list, turn on or off the features, as desired.
- Click Done.
-
To read the End-User Licensing Agreement (EULA), click
the Licensing Terms link.
The End-User Licensing Agreement opens in a web browser.
-
After reading the license agreement, turn on the
I accept the End User Licensing Terms check
box if you understand and agree to the License Agreement Terms and Conditions.
Note that agreeing to the license agreement is required in order to install the product. Turning on the check box displays the Cancel and Install buttons at the bottom of the wizard.
- Click Install.
- Click Finish.