Configuring OpenPlant Isometrics Manager to use Grids
For Grids to be used in the OpenPlant Isometrics Manager, the following configuration variables need to be defined:
IE_GRID
This variable specifies the location of the grid definition file. It is to be added to isoproj.cfg (located in the Workspace\Projects directory) and does not need to be explicitly defined or valid.
IE_GRID = $(IE_CONF)gridlines.txt
Style Configuration Variables
The remaining variables used to configure the use of Grids are defined on a per style basis in the style.cfg file. This file is located in the style's Config directory.
IE_TextGridLineSeparator
IE_TextGridLineSeparator = -
IE_TextGrid
This variable specifies the referencing part of a reference dimension. Any '@' in the definition is replaced by a space. The default position of the text is before the coordinate. The position can be set at the end by starting the definition with a %.
IE_Textgrid = From Col:The reference dimension displays as follows: If a % precedes the value as shown below
IE_Textgrid = %From ColThe reference dimension displays as follows:
IE_COORD_OUTPUT
#----------------------------------------------------------------------------- # IE_COORD_OUTPUT = # 0 output no coordinate labels # 1 output coordinate label in plant coordinates # 2 output coordinate label in column line references # 3 output coordinate label in both ways, each in a separate label #----------------------------------------------------------------------------- IE_CoordOutput = 1
IE_COORD_SWAP
#----------------------------------------------------------------------------- # IE_COORD_SWAP = # # 0 output coordinates in E/N/EL order # 1 output coordinates in N/E/EL order #----------------------------------------------------------------------------- IE_COORD_SWAP = 1