Click on File > OpenComms Settings > OSP - Copper to select the Load Coils Setup tab and display the Load Coil Attributes dialog:

Create a Copper Load Coil Model

1. Key in the load coil Model Name and Manufacturer. (Mfg. is optional).
2. Select a load coil type.
3. Enter the part number (optional).
4. Enter the number of pairs it can be connected to.
5. Enter the stub length and gauge.
6. Key in the Cost (optional).
7. Click on the cell Select button and type in the cell Name or highlight the Name and click OK.
8. Click Add to save the load coil model to the spec file.

Edit a Copper Load Coil Model

1. Select one of the existing load coil models from the Load Coil List.
2. Edit the Load Coil Attributes input fields as necessary.
3. Click Update to save changes to the spec file.

Delete a Copper Load Coil Model

1. Highlight the Load Coil model name in the Device List.
2. Click Delete to remove the (previously unused) load coil from the spec file.