The Modify Enclosure command changes an enclosure type.

Modify a Duct Enclosure

1. From the Modify/Delete section of the Duct Tab select the Modify Enclosure command:

   

2. Select an enclosure on the map.
3. The Change Enclosure dialog box opens.

   

4. Choose one of the enclosures available in the Enclosure pull-down menu.
   Note: If a fence was placed on the map before activating the Modify Enclosure functionality, the Use Fence would be available to change multiple enclosures simultaneously.
   Note: If the enclosure chosen to replace the current one does not have the same wall count or wall name, a windows opens to remap walls. Select the old wall name and the new wall name and click Assign.

   

5. Click OK to confirm and save changes.