Create a Rack Elevation

1. From the Placement section of the ISP Tab click the Rack Elevation command:

   

2. The Create Rack Elevation dialog box opens.

   

3. Select the Side (Front, Back, Front-Back, and Back-Back) and Type (Cell or Raster) to use.
4. Select the racks by placing a first point and a second point on the desired racks.

   

5. The rack elevation displays on the cursor for placement.

   

   Note: The textstyle used for the Rack Elevation is determined by the current active textstyle in the file.
6. Continue placing rack elevations or click escape to exit.
   Note: Set the active scale to 0.5 or higher if using a working units of 100.