Locate Outage
This command is used to locate an outage in the fiber network with data derived from an OTDR device.
Locate an Outage in the Fiber Network
- From the OpenComms Fiber tab, select the Locate Outage command from the Review/Validate section.
- Select an existing device: Head-end, Building, Node, Hub, Splice.
- Select the beginning sheath located away from the selected device.
- The Outage Fiber Selection dialog box opens.
- Select the fiber associated with the reflective occurrence from the dialog box.
- Key in a distance received by the OTDR.
- Click OK to proceed.