Change
The Change command enables a user to edit a fiber device or span model. In the case of fiber devices, the Change command can change device types as well as models within a specific feature category.
Change a Span
- From the Modify/Delete section of the Fiber Tab select the Change command:
- Select a Span on the map to be changed.
- The Set Symbology -SPANS dialog box opens.
- Choose the new Span model and click OK.
Change Multiple Spans
- Place a fence around the span segments to be changed.
- From the Modify/Delete section of the Fiber Tab select the Change command and select a Span on the map to be changed.
- The Set Symbology -SPANS dialog box opens.
- Choose the new Span model and click OK.
- The Change - Use Fence dialog box opens.
- Select the Change Selected Type Only check box to only change spans of the same model as the one selected on the map.
- Click Yes to proceed.
Change a Fiber Device
- From the Modify/Delete section of the Fiber Tab select the Change command and select a fiber device on the map to be changed.
- The Select Equipment dialog box opens.
- If desired, select the new device Type, Manufacturer, and device Model, and click OK.
Change Multiple Fiber Devices
- Place a fence around the fiber devices to be changed.
- From the Modify/Delete section of the Fiber Tab select the Change command and select a Fiber device inside the fence to be changed.
- The Select Equipment dialog box opens. Note the device types that can be changed by fence include Buildings, Cabinets, Head-Ends, and Splice Enclosures.
- Choose the new Type, Manufacturer, and Model for the device change, and click OK.
- The Change - Use Fence dialog box opens.
- Select the Change Selected Type Only check box to only change devices of the same model as the one selected on the map.
- Click Yes to proceed. A results dialog will display showing how many devices were changed.