Insert
The Insert command inserts a splice enclosure between two fiber sheaths while maintaining all fiber connectivity after a break point in the sheath has been defined with the Break command.
Break Span
- Select the Break Command from the Modify/Delete section to open the Break Span dialog:
- Select the Span by clicking on the sheath and a Break will be placed in the Span.
Insert a Splice Enclosure
- Select the Insert drop-down from the Placement section of the Fiber Tab:
- Select a span on both sides of the insertion point.
- Select a facility to place the new device on or within if using the Link to Strand setting.
- The Select Equipment - Splice Enclosure dialog box opens.
- Select a splice enclosure model and click OK to proceed.
- The splice enclosure is automatically inserted between the two sheaths.
- Enter the splice name and place it on the map.