Position
|
- Top
Side - When, on edge processing is made to the top edges of the
plate.
- Bottom
Side - When, on edge processing is made to the top edges of the
plate.
- – Deletes the current edge
modification.
|
Top/Lower edge
|
The following parameters are valid both for top and bottom side
of the plate.
- Chamfer
Layout - Selects the method of edge processing:
- Var1 - Sets
either the length of the first edge, the rounding radius or the depth of the
seam.
- Var2 - Sets
either the length of the second edge or the height of the seam.
- Selected
edge - Used to indicate from which edge to which edge the
processing is applied.
When you select the edge, and the side is
switched on, the edges are displayed numerically. You can select the processing
area. If the starting value is equal to the end value, the processing is
applied all around.
|