Span |
Sets the horizontal distance between outside edges of the outermost supports (the nominal span). |
Wall Height |
Sets the height at which the truss is placed relative to the data point or active ACS plane. |
Height AGL |
Sets the ridge (peak) height above ground level. The height measured from the bottom of the wall to the top of the truss ridge (peak). |
Left/Right |
Sets the variables pertaining to the left/right top chord of truss. Left/right values can be automatically synchronized by toggling the lock icon. |
Pitch |
Sets the slope of left/right top chords in degrees. |
Eaves Overhang |
Sets the length by which the truss extends past the outside edge of the outermost support. |
Lowered |
Sets the amount by which the bottom chord is lowered. Keep in mind, the elevation of the bottom chord will still be relative to the wall height. |
Tie |
Sets the thickness of the tie (horizontal) members. |