Modify Deck
Used to modify steel, concrete and composite decks. Opens when decks
placed using
(Place Deck) are selected with the
(Modify Properties).
Setting | Description |
---|---|
General |
Both the Place By and Concrete Fill settings are disabled in Modify Deck. |
Steel Deck | Contains controls used to modify the DataGroup catalog Type and Instance for the steel deck. |
Kind | Used to modify the steel decking specification mode. |
Kind: Table - Properties |
|
Steel Deck Properties |
Contains controls used to modify the steel decking
properties. Profile dimensions [Tw, Dw, Bw and D] are read only when using
manufacturer data, but can be modified if the deck was placed with the Kind:
Standard. The profile dimensions automatically reset with profile name.
|
Modify |
Used to validate and apply the steel deck settings changes. |
Close |
Dismisses all changes and closes the tool settings window. |
Deck (Properties) tab | Deck properties defined on the General tab are
available here as well as all the other Structural member properties stored in
the DataGroup System. Contains controls used to modify the DataGroup properties
of the deck. By default the Steel Deck properties panel is always preset.
Besides the Steel deck properties, the Concrete and Composite Deck properties
are available when
Concrete Fill option was set while placing
the deck.
There are several built in methods for entering property values:
|