Simple Truss
Setting | Description |
---|---|
Span |
Set the horizontal distance between outside edges of the outermost supports (the nominal span). |
Wall Height |
Sets the height at which the truss is placed relative to the data point or active ACS plane. |
Height AGL |
Sets the ridge (peak) height above ground level. The height measured from the bottom of the wall to the top of the truss ridge (peak). |
Left/Right |
Sets the variables pertaining to the left/right top chord of truss. Left/right values can be automatically synchronized by toggling the lock icon. |
Pitch |
Sets the slope of left/right top chords in degrees. |
Eaves Overhang |
Sets the length by which the truss extends past the outside edge of the outermost support. |
Tie |
Set the thickness of tie (horizontal) members. |