Used to move rooms and adjacent
ceiling and underfloor plenums, while continuously maintaining and updating the
room/plenum surface types and adjacency relationships with other rooms/plenums
or with the outside environment. For instance, a partition in the moved
room/plenum is made smaller when the room/plenum is moved away from an adjacent
room/plenum. Simultaneously, the area of the partition wall that was reduced is
converted to be of the exposed wall surface type.
Accessed from:
Move room tool settings vary for multiple story buildings
and single story buildings.
Multiple story
Single story
Setting | Description |
---|
Current floor
|
When on, the selected room is moved from its original location
to another location on the same floor.
|
Destination floor
|
When on, the selected room is moved from its original location
to another location on the selected floor.
- Floor drop-down
list — Used to select the floor to move the selected room into.
|
Floor level lock
|
When on, rooms can only be moved to a location on the same
floor. When off, rooms can be moved to different floors.
|
Inclusive Plenum
|
When on, any ceiling or underfloor plenum in contact with the
selected room are also moved. When off, plenums are not moved.
|
Key-in:
BBSENERGYANALYSIS
ROOM
MOVE