Add Lintel command settings group |
The following settings are available when the Add Lintel command is selected.
- Wall: — Place a lintel on the exterior or interior wall.
- Type: — Select the type of lintel.
- I-Beam – Invokes the settings for an I profile.
- L-Beam – Invokes the settings for an L profile.
- Soldier Course – Invokes the settings for a brick lintel. A soldier course can only be constructed around rectangular frames.
- L + Soldier Course – Invokes the settings for an L profile, brick lintel.
- Wood – Invokes the settings for a timber lintel.
- Concrete – Invokes the settings for a concrete lintel.
- Prefab – Invokes the settings for a prefabricated lintel.
- Roller Blind: — Available when Wall is set to Interior. Select the location for the horizontal recess.
- Height — Sets the height of the lintel.
- Bearing Left; Bearing Right — Enter the value for the overhang on the left and right. Bearing is 1/10 the width of the opening.
- Top, Left, Right, Bottom — Available when Wall is set to Exterior, and Type is set to Soldier Course and L + Soldier Course only. Choose the location of the soldier course.
|