Body | Height
|
Positive <numeric value>
- Sets height of
sprinkler body, usually the length of straight pipe from End1 of upright
sprinkler
|
Body Length
|
Positive <numeric value>
- Sets length of
sprinkler body, usually the length of straight pipe from End1 of sidewall
sprinkler.
|
Cap | Length
|
Positive <numeric value>
- Sets the length
of the Pip Cap when Cap Selection is
With Cap.
|
Cap Selection
|
- 1-With Cap - adds
body cap around sprinkler head.
- 2-Without Cap -
without body cap around sprinkler head.
- Toggles setting
cap around sprinkler head stowed above wrench.
|
Cap | Width
|
Positive <numeric value>
- Sets the width of
the Pip Cap when Cap Selection is
With Cap.
|
Cell Library
|
<cell library file name>
- Library file name
for device cells.
|
Cell Symbol Name
|
<cell name>;scale=<numeric
value>
- Sets the model
cell displayed to the device.
- Scale entry fits
cell proportionally to extents of device.
|
Connection 1 | Length (L1)
|
Positive <numeric value>
|
Connection | End Type
|
fl
-<numeric value>
- Sets and sizes
end with a flange connection.
m
-<numeric value>
- Sets and sizes
end with a male connection.
fe
-<numeric value>
- Sets and sizes
end with a female connection.
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2; creates a flange at End1 with size
2, and fe-.13; creates a female connection at End1 with an overall reduction of
component's dimensions of .13
|
Deflector Thickness
|
Positive <numeric value>
- Sets the
thickness to the metal piece of the deflector.
|
Deflector Width
|
Positive <numeric value>
- Sets the diameter
for the flower, or gear-shaped deflector at one end of the sprinkler head.
|
Damper | Diameter
|
Positive <numeric value>
- Sets outside
diameter of disk attached to base of sprinkler pipe.
|
Flow Rate (gpm)
|
<Positive numeric value>
- Sets a value for
the amount of flow through sprinkler head. Used to calculate overall flow rate
during analysis operations.
|
Flow Pressure (psi)
|
<Positive numeric value>
- Sets a value for
the pressure flow through sprinkler head. Used to calculate overall flow
pressure during analysis operations.
|
Glass Bulb Width
|
Positive <numeric value>
- Sets the nominal
diameter to fit the glass bulb used to release parabolic spray pattern.
|
Guard Length
|
Positive <numeric value>
- Sets length of
guard attached perpendicular to the disk of sidewall sprinkler.
|
Guard Offset
|
Positive <numeric value>
- Sets longitudinal
position of guard along disk of sidewall sprinkler. Zero offset aligns middle
of guard at edge of disk
|
Guard Width
|
Positive <numeric value>
- Sets width of
guard attached perpendicular to the disk of sidewall sprinkler.
|
Height
|
Positive <numeric value>
- Sets the overall
height of the sprinkler head assembly.
|
Inlet | Outer Diameter
|
Positive <numeric value>
|
Setting Type
|
- 1-Extended -
Sprinkler head below body cap.
- 2-Recessed -
Sprinkler head recessed down.
- Sets the
sprinkler head position.
|
Tag
|
<alpha-numeric characters>
- Sets tag value
visible in output of drawing composition in dynamic view.
Example; Upright, Sidewall for types of sprinkler.
|
Wrench Size
|
Positive <numeric value>
- Sets the width of
the hex-shaped wrench boss.
|