Angle 1
|
<angle value> between 5° and 90°
- Sets branch angle
between End1 and End2.
|
Angle 2
|
<angle value> between 5° and 90°
- Sets branch angle
between End1 and End3.
|
Angle Top
|
<angle value> between 1° and 90°
- Sets branch angle
between End1 and End3. Default 45°.
|
Angle Bottom
|
<angle value> between 0° and 90°
- Sets branch angle
between End1 and End2. Default 45°.
|
Auto Size
|
inradius;minlength
- Sets inner and
outer radii computed internally; however for a blank Auto Size option, R3/R4
values could be altered.
|
Branch1 Length
|
Positive <numeric value>
- Sets straight
length of side branch ending at End2.
|
Branch2 Length
|
Positive <numeric value>
- Sets straight
length of side branch ending at End3.
|
Branch Center Offset
|
Positive <numeric value>
- Sets center line
offset distance between End1 connect point to side branch start point. Limited
by application to prevent illogical fitting.
|
Branch1 Offset
|
Positive <numeric value>
- Sets the straight
length on the main branch's (End1) side adjacent to the first branch (End2),
thus offsetting the branches. The straight length begins at the end of the L1
dimension, and ends at the start of the first branch (End2) radius.
|
Branch2 Offset
|
Positive <numeric value>
- Sets the straight
length on the main branch's (End1) side adjacent to the second branch (End3),
thus offsetting the branches. The straight length begins at the end of the L1
dimension, and ends at the start of the second branch (End3) radius.
|
Branch Radius
|
<numeric value> greater than or equal to
zero.
- Sets center line
radii between End1 and End2/3.
|
Branch 1 | Extension
|
Positive <numeric value>
- Sets the straight
length on the branch terminating at End2. The straight length begins where the
radius stops, and ends where the L2 dimension begins.
|
Branch 2 | Extension
|
Positive <numeric value>
- Sets the straight
length on the branch terminating at End3. The straight length begins where the
radius stops, and ends where the L3 dimension begins.
|
Branch1 Length
|
Positive <numeric value>
- Sets branch
length. Center line distance between side branch divergence point to End2
connect point.
|
Branch2 Length
|
Positive <numeric value>
- Sets branch
length. Center line distance between side branch divergence point to End3
connect point.
|
Branch 3 | Depth Offset
(for Drop Cheek fittings)
|
<numeric value>
- Sets center line
distance between End1 connect point and the divergence point of side branch
leading to End3.
|
Branch 4 | Depth Offset
(for Drop Cheek fittings)
|
<numeric value>
- Sets center line
distance between End1 connect point and the divergence point of side branch
leading to End4.
|
Branch 3 | Angle
|
<angle value> between 1° and 90°
- Sets branch angle
between End1 and End3.
|
Breech Type
|
flat
elliptical
- Sides of fitting
are fully rounded.
|
Center Line Offset
|
Positive <numeric value>
- Sets center line
offset between End2 and End3 connect points.
|
Connection 1 | Length (L1)
|
Positive <numeric value>
- Sets End1
connection length for round and oval shapes.
- Sets straight
length on all branches for rectangular shapes.
|
Connection 2 | Length (L2)
|
Positive <numeric value>
- Sets End2
connection length for round and oval shapes.
|
Connection2 to Connection3 Offset Distance
|
Positive <numeric value>
- Automatically set
by the application.
|
Conection2 to Connection3 Offset
|
Positive <numeric value>
- Sets distance
between the bottom surface of End2 to top surface of End3.
|
Connection 3 | Length (L3)
|
Positive <numeric value>
- Sets End3
connection length for round and oval shapes.
|
Connection | End Type
|
fl
-<numeric value>
- Sets and sizes
end with a flange connection.
m
-<numeric value>
- Sets and sizes
end with a male connection.
fe
-<numeric value>
- Sets and sizes
end with a female connection.
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2;fe-.13 creates a flange at End1 with
size 2, and a female connection at End2 with an overall reduction of
component's dimensions of .13
|
Depth Offset
|
<numeric value>
- Sets top offset
between End1 and End2. Top is fully flat with a zero value.
|
Distance to Crotch From Top
|
<numeric
value>
- Displays the top
distance of Wye end from the crotch.
|
End2 Run Offset
|
<numeric value>
- Sets right offset
between End1 and End2 with zero value being fully flat.
|
End3 Run Offset
|
<numeric value>
- Sets right offset
between End1 and End3 with zero value being fully flat.
|
Header Length
|
Positive <numeric value>
- Sets center line
distance between End1 connect point to side branch divergence point.
|
Height
|
Positive <numeric value>
- Sets center line
distance between End1 connect point to farthest point along center line.
Automatically set by application.
|
Rise Offset
|
<numeric value>
- Sets top offset
between End1 and End2 with zero value being fully flat.
|
Radius 1 (R1)
|
<numeric value> greater than or equal to
zero.
- Sets the inside
radius between End1 and End2.
|
Radius 2 (R2)
|
<numeric value> greater than or equal to
zero.
- Sets the inside
radius between End1 and End3.
|
Radius 3 (R3)
|
<numeric value> greater than or equal to
zero.
- Sets the outside
radius between End1 and End2.
|
Radius 4 (R4)
|
<numeric value> greater than or equal to
zero.
- Sets the outside
radius between End1 and End3.
|
Straight Bottom
|
<numeric value>
- Sets the branch
(at end3) length of cross along bottom side.
|
Straight Left Bottom
|
<numeric value>
- Sets the branch
length of wye at left side down along end3.
|
Straight Left Top
|
<numeric value>
- Sets the main
branch (at end1) length of te along top side.
|
Straight Right
|
<numeric value>
- Sets the branch2
length of wye of along bottom side.
|
Offset Options
|
<null value>
- Frees fitting
from any symmetry constraints.
a
<angle value>
- Face is offset by
an angle value.
a<
<angle value>
- Changes the
default minimum angle check of 5° to the New Value.
b
b
<numeric value>
- Bottom is offset
by value.
ba
<angle value>
- Bottom is offset
by an angle.
l
l
<numeric value>
- Left side is
offset by value.
la
<angle value>
- Left side is
offset by an angle.
r
r
<numeric value>
- Right side is
offset by value.
ra
<angle value>
- Right side is
offset by an angle.
s
st
- Symmetric fitting
with respect to top and bottom.
sr
- Symmetric fitting
with respect to left and right.
t
t
<numeric value>
ta
<angle value>
- Top is offset by
an angle.
Combined entries are separated by forward slashes. Entries
are honored in order from left to right. Angle value range is – 85° to + 85°
unless a<xx° is encountered.
|
Total Length (L)
|
Positive <numeric value>
- Sets overall
length of fitting.
|
Width Offset
|
<numeric value>
- Sets front offset
between End1 and End2. Front is fully flat with a zero value.
|