Wall type
|
When on, the wall construction type can be changed
globally for the selected rooms.
- New
data — Used to select a new wall construction type. The project's
available wall types are listed. The wall construction type selected here is
the wall construction type the selected rooms will be globally changed to when
the
Apply button is clicked.
-
Restrict changes — When on, the changes
can be restricted by selecting a wall construction type to omit from the global
change. The wall construction type selected here will be checked for in the
selected rooms' existing room wall data. If the data check finds the same wall
construction type, the room is omitted from the global change when the
Apply button is clicked.
|
Partition type
|
When on, the partition construction type can be
changed globally for the selected rooms.
-
New data — Used to select a new
partition construction type. The project's available partition construction
types are listed. The partition construction type selected here is the
partition construction type the selected rooms will be globally changed to when
the
Apply button is clicked.
- Restrict
changes — When on, the changes can be restricted by selecting a
partition construction type to omit from the global change. The partition
construction type selected here will be checked for in the selected rooms'
existing room wall data. If the data check finds the same partition
construction type, the room is omitted from the global change when the
Apply button is clicked.
|
Fin type
|
When on, the fin construction type can be changed
globally for the selected rooms.
-
New data — Used to select a new fin
construction type. The project's available fin construction types are listed.
The fin construction type selected here is the fin construction type the
selected rooms will be globally changed to when the
Apply button is clicked.
-
Restrict changes — When on, the changes
can be restricted by selecting a fin construction type to omit from the global
change. The fin construction type selected here will be checked for in the
selected rooms' existing room wall data. If the data check finds the same fin
construction type, the room is omitted from the global change when the
Apply button is clicked.
|