创建报告组件
-
选择 (高度)
这些公式在公式列表框中显示为:
- H(高度)
- VOL / SB(体积除以曲面底部)
-
Calculate English unit quantification for a tile component installed along a 5 foot – 3 inch section of wall:依次选择 (中心长度)、*(星号操作符),然后输入 5.25(5 英尺 3 英寸)。
此公式在公式列表框中显示为:
- LC * 5.25(长度乘以 5 英尺 3 英寸)
-
Calculate Metric unit quantification for a tile component installed along a 1500 mm section of wall:依次选择(中心长度)、*(星号操作符),然后输入 1.5。
此公式在公式列表框中显示为:
- LC * 1.5(长度乘以 1.5 米)
-
Calculate English unit quantification for footings using an excavation component; where the footing is represented by a single line:依次选择(中心长度)、*(星号操作符),然后输入 2.75。
再次选择 *(星号操作符);然后输入 2.33。
此公式在公式列表框中显示为:
- LC * 2.75 * 2.33(单线长度乘以挖掘深度,再乘以挖掘宽度)。
-
Calculate Metric unit quantification for footings using an excavation component; where the footing is represented by a single line:依次选择 (中心长度)、*(星号操作符),然后输入 0.8(米)。
再次选择 *(星号操作符);然后输入 0.6(米)。
此公式在公式列表框中显示为:
- LC * 0.8 * 0.6(单线长度乘以挖掘深度(米),再乘以挖掘宽度(米))。