| Angles
|
Top Angles — Sets the angle
between the highest face and the ground plane,
Other Angles — Sets the side
face angle relative to the ground plane,
Bottom Angles — Sets the
angle that the lowest face makes with respect to the ground plane.
The Options are:
-
Angle — Specifies the number in degrees
of the angle between the base shape and the face of the form.
- Entering
0.00 results in a face perpendicular
to the shape’s base;
- a negative value
produces an angle greater than 90 degrees;
- a positive value
produces an angle less than 90 degrees.
-
Horizontal — The face is parallel to the
global XY plane.
If you select
Horizontal for a face that cannot be
horizontal, the face is constructed vertically.
-
Vertical — The face of the form is
perpendicular to the global XY plane.
If you select
Vertical for a face that cannot be
vertical, the face is constructed horizontally.
|
| Thickness
|
Specifies the thickness of the extruded slab.
|
| Tolerance
|
Controls how many segments comprise a curve:
Increasing the value creates fewer segments; decreasing the value creates more
segments.
|
| Reverse
|
Reverses the direction of extrusion.
|
| Delete Constructions
|
If on, the element from which the form is extruded
is deleted.
|
Used to create a
slab-shaped projection from a three or four sided shape.
