Changes the thickness,
direction, and/or top shape of a selected form to match another form.
Accessed from:
- Ribbon:
Building Design >
- Ribbon:
Building Design >
- Ribbon:
Building Design >
Setting | Description |
---|
Match
|
Controls which aspect of the form to match and
change:
-
Thickness — The form being changed takes
the thickness or width of the selected matching form. The thickness setting can
be applied to linear and line string forms only.
- (Extrusion)
Direction — The form being changed takes
the height and direction of the selected matching form. The extrusion direction
setting cannot be applied to slab forms.
-
Top — The form being changed is extended
so that the top matches the top shape of the selected matching form. The top
setting cannot be applied to slab forms.
|
Key-in:
TFMATCH
FORM
If the first form
has a uniform height, the second form will be modified to the same height. If
the first form has one top face that is not parallel with its bottom face, the
top face of the second form will be located in the same plane as the first
form.
Note: If the first form has more than one top face, the second
form is extruded against the same shapes that defined the first form top.